Subject: RFQ and physical samples - RYFT HT01 R01 blind-deboss hang tag

Please quote the attached RYFT hang tag manufacturing pack, revision R01.

Baseline: finished 50 x 90 mm; black dyed-through matte textured duplex
board, nominal 700 gsm; recessed blind-deboss RF at 30 mm wide plus small
RYFT wordmark; one opaque muted gray rear print; one 4.5 mm punched hole;
black 2 mm braided polyester cord with knot and two matte-black capped ends.
Use supplied vector artwork, not the photo, for tools and print plates.

Please quote 500, 1,000, 2,500 and 5,000 finished corded tags and indicate
MOQ per size/color rear-print variant. Final SKU quantities will follow.

Please itemize:
- Unit price and total at each quantity tier.
- Board brand, shade, texture, grammage and actual finished caliper.
- Rear-print process and opaque gray drawdown cost.
- Die/punch tooling, setup and any variant print setup charges.
- Tool ownership, reuse, storage period and repeat-order charges.
- Five complete pre-production samples and sample lead time.
- Bulk lead time after sample approval; packing/counts and shipment weight.
- Shipping basis, payment terms and any over/under-delivery allowance.
- Cord/cap materials and proposed assembled loop/attachment method.
- Any tolerances or artwork details you cannot achieve as specified.

Please confirm that the rear remains clean without the RF relief showing
through and that the gray print passes the agreed rub check. Send a marked
1:1 proof and physical material/relief samples before tooling release.

Quote any lower-cost material or construction alternate separately, with
physical samples and its expected differences. Do not substitute materials
or change artwork without approval. Bulk manufacture requires a released
order and signed physical golden sample.
